This is a fun way to use up some of your fabric. I made several seasonal pillowcases for my College Age daughter and had the Cuff monogrammed with her name and initials.
Fabric
Body: ¾ yard
Cuff: ¼ yard
Trim: 1/8 yard
WOF = width of fabric (42”-44”)
TRIM: (1) - 2" x 41” folded and pressed in half lengthwise (wrong sides together).
CUFF: (1) - 9"x 41”. BODY: (1) – 26” x 41”
Step 1:
Lay the folded and pressed trim piece on top of the cuff piece right side up. Pin in place.
Step 2:
Place the body piece right side down on top of the pinned pieces above. Pin in place. Stitch ¼”from raw edges. *At this stage you might want to trim the sides to even the 3 layers.
Step 3:
Roll body piece to the sewn edge but out of the way of the seam. Bring the cuff piece (wrong side out) around the body. Turn the whole unit over and pin. Sew to the left of the first stitching.
Step 4: Pull the hot dog (body) out of the “bun” (cuff). Press.
Step 5: Put wrong sides together and stitch 1/4”"seam across the bottom and open side.
Step 6: Turn wrong side out (right sides together) and restitch the bottom & side using ½” seam.
Step 7: Turn right sides out and press.
You just made a “Hot Dog Pillow Case.” Congratulations!



